[MEDIA] I basically found it because a TPS-L2 teardown video came into my recommended because I used the same channel to help me replace my belts...
I think I've figured out the problem [ATTACH] One of the strands of wire that conjoins the redt of the coil to the solder joint was severed in...
An update 2 years later. I found someone selling a WMF-1600B motor standalone on eBay the other day which I bought, so I decided to have another...
It's hard to tell from a still picture. I'm guessing by casette Turner you mean the take up and supply spindles that goes into the 2 holes of the...
Ok wait I think I've found a good solution I used a Pen spring and twisted it into the loop so that it tugs on what's left of the hole. I'll use...
I think I'm gonna have to try what you said before. Doing what I said I was gonna do in reality is much harder than I thought it'd be because it's...
I dont want to be too rash so I'll just use glue as a temporary measure and maybe when you're able to get back to your collection you can do me a...
Uh huh so basically if I want to listen to cassettes I should just build my own Walkman from scratch lol I was hoping this would be an easy fix I...
I brought a TCS 310 on Ebay while the play and stop buttons do work the owner neglected to mention fast forward, rewind and record doesnt work. I...
Did you reflow the solder joint for the ground connection to the headphone Jack sleeve? I dont know what you specifically mean by contact cleaner...
It might be the capacitors, if you have a multimeter and the service manual you should be able to touch the solder spots of the capacitors and...
Basic parts yes. But some things like Motors and etc that are specific to the product will be very difficult to reproduce
Thanks I might resort to spare parts later if I'm going to throw away the motor I might as well die trying to resolder the wire to the wire loops...
Eurgh another headache I've lost the grey plastic volume sliders that fits onto the black circuit board one. Is it possible to get another one. Or...
Eurgh fixing Walkmans is so ugly it's not for the faint of heart. It makes you wonder eventually they'll come a point where there irreparable.band...
You fixed it :D God I'm jelly. Can you link me screws on Amazon or something that would do the job as I cant trust myself to find the right one....
I know this is a bit of a dick move reviving an old thread(ugh this was a typo earlier and said friend verbal diahorrea soup) but I never got a...
Anyone have any ideas on how to get into this I would use pliers but I'm scared I'm gonna rip off the wires. [ATTACH]
I can only remove the metal case the motor is put in its impossible to get to the coils it's too tight
I'm soo happy to finally have a solution. The thing is I didn't expect there would be a problem with circuit board electronics too, because the...
Separate names with a comma.
