gears and retainers arrived. No wonder the photo in the ad is not too good. these things are really tiny.
Valentint. There are two capacitors in the motor governor circuit. Have you ever needed to replae them?
Valentin, here's the link to the toshiba KT-RS1 (among others) gears: https://www.ebay.com/itm/316578741510 PS: is there any way to change the...
Valentin, You apparenlty have found that the small parts with the hex which mount on top of the spindles also crack. Mine seem ok. It looks like...
HI Valentin, The cracked gear repair: Do I understand this correctly? you remove the smaller gear from the shaft, clamp it together to close...
The 8x6.15 rollers arrived, installed and work fine, nothing tricky about clearances. Plays very well in one direction, not good in the other,...
Hi Valentin, At least my hex cap-parts are not cracked.
You were right Valentin, The small gears on at least the reel hubs on one of my RS-1's are cracked. Hard to see, though. What can I do? Glue them...
I've checked the gears on two of them and they look ok. The one that I'm trying to fully revive first seems ok, but I didn't take it apart enough...
Lognman could you post a link to this video. I have 5 of these things and not one of them has any problem with the gears. problem after belt to...
Hi Valentin, It is difficult to measure clearance between roller and the feed side capstan but it llooks like 1.1 mm which doubled and added to my...
HI Valentin, Thank you for your useful advice. On the long pinch roller description, in order it is OD, Overall Height, Tire height, Hub flange...
I now have five of them. I believe that the KT-AS1 is similar but does not record. Except for the one which turned out to be heavily corroded,...
Hi, 82 year old retired architect with a lot of cassette decks, Nakamichi Receivers, B&O Speakers, AR -2's, now trying to get the w&f out of a...
Separate names with a comma.
