Yeah, bigger issue is that looking closer at that bracket hole the screw did in fact break off in there, so there's very little threading...
I ordered a new pinch roller from Fix your Audio just to keep refining this thing now that it works (along with a test tape). So I'll do another...
Thank you So much Valentin! I got the clutch parts off easily enough and cleaned them with just iso and reassembled (wasn't sure if they needed...
It was completely seized up. I popped off the retaining washer and popped the clutch and washers and they were all very heavily stuck together....
Yeah on a second inspection the whole pinch roller is making contact when it play (and powered). I made the mistake of seeing that when the...
In the daylight actually I can see that the pinch roller is tilted. Only contacting one side.
Thanks for the tip, new here and not familiar with the posting culture. As far as the head bridge, I'm not sure what I'd check there. Should I...
Thank you for the tip, I tried pressing on the pinch roller carriage to see if that adjusted anything and it seems it is making too little contact...
I bought a WM-2 (SN: 640858) off ebay. Initial condition was non-functional, not powering on with batteries. General repairs were: - Replace...
Hello y'all, I'm from DC and recently got the audio cassette bug. I've been getting more into analog media recently. I have a bunch of vinyl,...
Separate names with a comma.
