So here's the question. Cleaning tape heads and rollers. I normally use a high percentage isoprop, but I'm reading that some people use,...
After my experience shopping for some of these caps, I do worry whether in a decade or two, it will be impossible to get some of these caps and...
Thunderbirds are go. Blue vinyl on a red deck. Cool colour combination or what :-) [ATTACH]
That stand and turntable are pretty cool, indeed. Also the "sensors" for the record size. Can't tell what they do really, as the cue and speed...
Thanks for this. I think what's confusing me even more is that the new 0.1 muf 50v cap (not pictured) is a little more than twice the size of the...
I am replacing what I think is a like for like cap... but the replacement is small enough for me to consider whether the (M) by the side of the 1...
Someone with more experience than me, will re-cap my TPR-950 for me. I was wondering where I could get some replacement belts please, as it might...
So, this is what I ended up ordering. Panasonic didn't cover all the range, so I went for Nichicon. Total cost including postage is less than £40,...
I guess it's easy once you know what you're reading :-) ... I learn something new every day!
That's quite a job! Who'se caps would you recommend I try and buy for through hole? Also, there's an amp with a heatsink and I'm going to have...
Yes, I do have the service manual... however the capacitor listings only list a partial value. They are listed instead by part number and although...
Yes, it's a good suggestion, and sometimes I do that, if the recordings themselves aren't recordings off vinyl. I did actually manage to find...
Is this right? Picture attached, but I'm scratching my head. Some readings are at 47 muf, some at 4.7 muf... er... at the moment I have little...
Mapping these buggers is going to be a long arse job, but it'll be worth it. [ATTACH]
Just starting work on the Panasonic boom box. Looks like a spider had set up home in here at some point. I wonder if I'll find it while taking it...
OK - so the silver one is here and installed. I tracked down my conversation with Teac in 2019 and the correspondence actually happened with a...
Getting another one wasn't easy, but I saw this at a reasonable price with a seller with a reasonable amount of good reputation, so I've taken a...
This is going to be a bit of a curveball. My PC's and small stack go through a Teac AI-101DA. The key thing is it gives me choice and it's small....
Thanks for the good wishes .... as for putting you off and being afraid to ask about things ... I do have that effect on people :-D
Can you believe it. I'm still here! So... in my last post from late 2019, I detailed that life was complicated. To cut a long story short, I now...
Separate names with a comma.