So, they must have upped the capacitor then. I wonder if I'd have anything to gain by changing the caps in the P505 to thru-hole? I've got to...
The last one is the PX557 - an amsolute pain in the rear end. So many points had to be de-soldered before the board would come off, and I had to...
4 out of 5 - one more to go. This is the HS-PS610 - a sod to get off. Six solder joints at the top left, and four at the bottom-mid right....
3 of 5 - The HS-RX610 looks to be a copy of the P505 as far as capacitors and soldering is concerned. Slightly different screw points, and there's...
Now the HS-PL55... bit of a sod to take apart, but I got there... [ATTACH] [ATTACH] [ATTACH]
So... the first picture, the Sony. Reported fault is low volume. Two standard caps, and I'm not sure what else is in there. Not sure what to put...
Listening to my rambles should come with a health warning :-) ... many thanks for the link. I'm going through it now. This month I'm flat out...
So, I've been quiet... but I'm not doing nothing... I'm hardware modding three backup Original Xboxes while I can still get the parts, and when...
So... this is what we're dealing with... [ATTACH] HS-PX557 - Unit is working, but likely needs a recap and acid clean. Also azimuth and speed...
Bingo!!! How didn't I see these !!! Thanks :-D
What I'l looking for, are these... only without the fancy graphics :-) [ATTACH]
Thanks very much for the offer. I hope to have everything taken apart and listed in two or three weeks. Azimuth alignment is something I haven't...
Thanks :-) - I already have a copy of it. My problem, is the printer. It has weird margins and behaviours. I'm also using individual J-Cards,...
So... what's happened now? Well, I'm kind of at a stalemate. The Sony K222ESJ is here and settled in nicely. Getting some good recordings out of...
... before I got a format that worked on the printer and I was happy with. Still comes out a little on the twist, but it's better than nothing and...
Cheers. Looks like I'll be doing a variant of the CD SPine Label sheet.
Thanks for that. I do have some of those full labels already, but I concluded that they obscure the character of the cassette too much. Hence the...
Thanks. Looks like they don't ship to the UK ... but that's given me some better search terms to try.
At the moment I'm starting to think that my best bet is to take an A4 single label sheet, and print my own template.
Hi Folks, I've got pretty much everything sorted out now, but one thing I'm looking for is a sheet of labels that are used on the top of the...
Separate names with a comma.