I believe that the default 470 was 6mm wide, but could be pushed to a max of 8mm wide.
I'm having a problem finding an appropriate through hole cap. I'm obviously searching the wrong terms because the only 470uf I'm finding are 10mm...
As title ... does anyone have a service manual for the HS-P505 please? The schematic and circuit breakdowns would be most useful in trying to...
I'd already cleaned the board with baking soda. I think that while I was replacing some dead microswitches, and fighting with another (which was...
Thanks for that. I'll add those to the shopping list. The 220 2v... are there smaller ones available, or should I use the 6.3v you've linked...
Good advice. Especially about the beer.
I'm trying to find the caps on Farnell ... but after finding what I think is the Nichion I'm wondering if it is a mm too wide?...
I think I killed my transport. The unit has two pins which solder to the motherboard... and I think I applied too much heat, once to often, and...
That time when you've been battling with a board, but when you put it in reverse... you get the same side... only backwards. No clue. Utterly ......
Putting back the sliders in the P505, but they are dropping out. I've noticed that these plastic pieces came out as I disassembled the unit, but...
Now that I've got this P505 running, I'm actually listening to some of my old mix tapes from the 80's. I've also been listening to a tape I...
I'm missing some screws for the Aiwa P505 and trying to do a forum wide search for "screw" unfortunately produces rather a lot of results :-)...
Yes, the procedure was followed. I cleaned it as best I could, but some of the solder is refusing to come clean. I need some better brushes ......
Thank you :-) ... and now for the next challenge... assembling the sodding thing again !!! ... that's tomorrow's job.. but I'll probably swap the...
Now fully working. Well, you know about the caps. That much is taken for read. Three problems... 1) The play button microswitch was dead 2) The...
YES - YES - YES - YES - YES - GOT IT !!! ... wow... nothing quite like that feeling of getting it working. Well... at least I've got the...
I did get a step further. There is a safety mechanism that will allow forward and rewind while the lid is open... but it won't allow play while...
I am repairing an Aiwa HS P505 - and originally it wasn't listening to the play button. (I don't have a service manual for this unit) The play...
I think I'll wait for your renewed capacitor article!
Too true !!! The P505 is my first repair and has been a minor disaster so far, while I learn various things. The tants are all I've got, so for...
Separate names with a comma.