Well, some of these Bandridge .. I put in cars for some friends when I was much younger
I saw the ad too really nice I saved it in my favourites...
@Mister X Continuing on the Italian magazines you will eventually learn to read it :thumbsup: ... thanks for the link @Mister X Continuando...
Small comparison on the frequency response of these Aiwa... also consider the years of production [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
will you also reprogram this with the FTS system?
I confirm what @Silverera says these are mine, not all perfect and working, but because I haven't opened them yet the ones I use and is fully...
and true I have not taken into consideration the audio Beep ( green square ) you should hear it on both channels ... enter where a few photos ago...
So starting from R43 in blue on the left, following the circuit on the other side ... cross the capacitor and get to Q9 on the right ... from the...
But behold, the syringe (Siringa) as it is written on the radio, in Italian is for medical use.... :shock Why call a radio like that... what...
Maybe this tred can help you Walkman WM-3 / TPS-L2 : correct belt path, idler tires, and gear mechanism concerns | Stereo2Go forums
ok we narrowed the field... most likely the Q9 2sk880 doesn't work well... the red dot is connected to the volume channel that you indicated as...
for me too and the first time
let's jump ahead after the dolby chip and the BBE chip.... I would like to hear if the signal arrives in the orange square... but those components...
HI these are enough for you without soldering tin anything... a small amplifier also a boombox with external input and the easiest method for...
Hi, great job done so far I start from the schematic of the preamplifier on the outputs of pins 19 and 6 of the BA35313 chip you must have...
I have one but it is not in the same condition ... Beautiful
excellent explanation @Recaptcha I could not have done better But if it is not the switch S703 that causes the logic level to change on pin 9...
Thanks for the schematic
There is also a procedure with plastic it is sprayed first with a conductive paint .. like graphite and then the galvanization is done ... on you...
HI no it has no charging function there should be a switch in the socket that disconnects the battery when you connect it to the external...
Separate names with a comma.
