This is what I have. It would be nice to see some basic cleaning and lubrication for this model explained. So far I have replaced the drive belt...
Let us know how it goes. This model shares many components with many previous and last JDM Walkman models.
The obvious limitation I see is the limited button control without the original remote. Unfortunately, I don't know about the sound quality of...
That's right, these are the RMS% DIN values from WFGUI 8.60. I'm also disappointed by such lousy results with the new belt and pinch rollers from...
Performed measurements of W&F and tape speed followed by replacement of the belt and pinch rollers. Before: W&F 0.9-1% DIN, tape speed 2860 Hz on...
The other day, I received all the parts and test tape from four suppliers. I hope to start these things in the coming days. First, I will measure...
I think so.
Are there holes on the back cover that are aligned with the brushes? Sometimes I've seen a couple of tiny holes in the back where needles can be...
Thanks, Duey71! I'm waiting for electronic parts that I calculated based on simulating the response of the equalizer control chip. They are...
Thank you. Less to worry about. I have not yet checked the integrity of the gears of the EX60 mechanism. Still waiting for packages from three...
WM-EX60/EX70
Just curious, Is this the same mechanism that Valentin mentioned, or a different one? [ATTACH]
For shaft centers use watch oil. For gears or linkages, use white lithium or silicone general purpose grease.
Isopropyl or denatured alcohol works well for cleaning the head, pinch rollers, capstains, drive belts and pulleys. If you need to remove old...
I think this is a single head model with reversible sides for Left and Right stereo channels. See example here: [ATTACH] All four are inside one...
And this is the hypothetical response of the circuit to my tunings with changes in the resistors and capacitors mentioned above. [ATTACH] Now all...
Thank you. I quickly looked at the circuit diagrams of other Walkman models and found that most EX-DBB models have a similar circuit with a 3-way...
So, here are our replacement candidates: [ATTACH] My caliper shows that the SMD component sizes are close to the 0603 imperial (1608 metric)...
Hi everyone, My name is John. I recently purchased a WM-EX60 in mint condition. It is fully functional, and I tested it with several recent...
Hello to everyone, I'd like to introduce myself. My name is John. I'm new here and looking for specific information about Sony Walkman cassette...
Separate names with a comma.
