Let us know what you find. Electronics indeed can't be excluded, although don't think it's the most likely scenario. One possibility is head...
Yes the PCBs are the exchangable. Even if you see some minor differences, theese are revisions of the same board with no functionality change....
Symptoms of aging capacitors are different. Decreasing capacitance on the output caps would render less sub-bass, but for this to happen the...
For reference, I posted a toturial in regard to the middle pulley here:...
There are 2 distinct noises in the video: - there's a low frequency periodc gear engagement noise. This is likely caused by a gear that has become...
You stated in first post that power LED also goes out, case in which there's no reason to suspect the wires going to the motor. Rather it's a main...
Oxidized leaf switches are a common problem on these series, starting from WM-10 up until the WM-100/200 series. Many times the only solution to...
Doing more of the same and expecting different results is not a good strategy. It's more than likely not a lubrication problem. Regarding the...
Will check if I took any pics when I did this. Don't think there are any online, at least none that I've came across. And yes the service manual...
Even the ones that don't look great in pictures are not bad at all, it's just that the edges have some remains from the mold. The best value for...
The takeup reel being stuck from hardened grease is a problem that can occur on these units. Unfortunately disassemblying the reel mechanism is...
Sounds like a gear is touching something. Not a normal issue caused by lack of lubrication, there is a problem that needs to be investigated....
Yes I will mention it more explicitly in the thread. Looking at it, cleaning that is already mentioned in the last picture of first post, but not...
Would check that lever into the button slot, maybe the edges need a little bit of sanding to fit better into the slot. If the levers are moving...
See the difference in slider position, at first glance it looks to protrude enough to make the button lock. Question is: when you have the...
Have you checked what's mentioned at post #3 in the thread ? Is that lever with lighter spring moving freely and coming back on its own ? Note...
You need to check if the latch mechanism is still intact. That battery compartment does come out completely if needed. Btw, DD9 tutorial is...
Reserved
Separate names with a comma.
