@Mr.Swift thanks for making us aware of the baking-soda-super-glue repair method. I really think this might work on the broken tips, with some...
Done :-) Over the weekend I have fixed the broken tips of the (in)famous LEVER ASSY, FWD - see pictures enclosed. I drilled a tiny 0.5mm hole...
@Valentin Couldn't help and check - with the help of the mech description I can point out the step where the error occurs. All seem to look ok...
Sorry for late reply. Managed to brake my clavicula on Wednesday and I am handicapped now... @Valentin But so many thanks for you post and...
The spring and the lever seem to be ok with my Lever Assy. But when I disassembled my device I first noticed the brass pin, then the spring flying...
I noticed on shapeways.com there are already some Walkman-parts available as 3D printing shapes (e.g....
@Valentin: I broke one tip on the way out. I tried indeed to push from below. I followed the fixyouraudio instructions (recommending to work from...
I have a digital meter, Ohm ranges are 2M, 200k, 20k, 2k, 200 (no k). I set it to 200 and the reading was 0.5 (practically the same as if I am...
I have a measurement now for the FG, measured between the 2 black wires leading to the Capstan: 0.5 Ohm, meaning no resistance. Far away from the...
Again thanks Valentin! Indeed I noticed the center gear wobble - one more reason to disassemble again. Need to squeeze out some time to do and...
Thanks a ton for your reply Valentin! I put out a post in the "Gear that you want" section - didn't see it before. As per speed issue I hope I...
Hi all, after my first repair attempt I solved the center gear issue, but broke the tiny tips of the plastic slider controlling the tape head...
Hi Forum, __edited__ I am a newbie but ventured into the restauration of a DD2. I bought the device lately -and found the operation was ok but...
Newly entering here since recently I migrated back from totally digital to analogue - or just so. If you have nothimg better to do read on how...
Separate names with a comma.
