@Matias I suggest creating a separate thread on the forum regarding your belts. This way more people will know about it.
EX60 and EX70 clearly no, see picture attached. Circled part is not the clutch, picture was marked for a different thread. And same applies to the...
Hello and welcome to the forum, John ! Always nice to see like-minded people joining the community.
Generally speaking, there are walkmans with 2 individual heads (like WM-EX999 - https://walkman.land/sony/WM-EX999), but it's not common at all....
I'm on the same page, all points of view presented have value and are valid. From one perspective, walkmans are a means to an end which is...
Reserved
This thread covers a different method of removing the plastic slider on SONY WM-DD walkmans, which is significantly less risky than the one...
Production cost and how much money they may have lost on the model are not relevant for today's prices. Only thing that matters to some degree is...
Yes, that is correct. In regard to re-installing the back cover, this part is where you should pay the most attention to. Bend the brushes and...
The AF604 sounds about right. Given it's a recording, can't really assses the exact loudness, but the tonality and loudness seem to be more or...
The mechanism is very similar (possibly identical) to WM-55. To be noted belt in the first pictures looks too thick for this mechanism, it needs...
I assume the problem is the unit does not turn on. L4 is a transformer by the looks of it, being part of the DC-DC convertor. From my...
In regard to rusty capstans, I have seen that on a few walkmans, especialy the WM-700 series but these are not the only ones. If there are just...
Weighted RMS (WRMS) is the most typical measure for wow&flutter. This is the circled green value. Apart from this, WFGUI shows a peak value, which...
@SoundBuzz The fact Q105 looks fine visually doesn't mean much. You need to check the signal path from point to point (with oscilloscope or...
Some DeckTech belts I did found to look a bit old, but they worked fine and w&f was very good. While the above mentioned ones will likely not...
It's way too much, you need to have 0.05-0.1mm of play. In other words there should be just enough play so there is no friction on the washers,...
Something in regard to testing these levers work correctly (before and after the cleaning/repair): push the bigger lever arm down and see if it...
@BusiG Watched the video, can't hear the solenoid. Right after you press play, the solenoid should engage (pressing play not shown in the video)....
Let us know how you find the belt #2. I had good experience with DeckTech belts and have used many of them. Please share the negative feedback...
Separate names with a comma.
